ASSEMBLY INSTRUCTIONS
1. Ensure the air intake is clear of obstructions and the zipper is fully closed. Some inflatables have more than one zipper.
2. Connect power supply (D) into fan, then plug into standard wall outlet.
3. Using bottom loops, insert stakes (C) into the ground. Adjust weight bag to position your inflatable.
4. Once inflated, clip the tethers (B) to the side loops (A).
5. Drive the stakes (C) into ground at a 45-degree angle.
6. Bring the tether down to a 45-degree angle from the inflatable. You may need to wrap the excess tether around the top of the stake.
DOS AND DONT’S
1. Do check your inflatable daily and adjust to stand up straight.
2. Do not attempt to operate your inflatable in unusually strong winds.
3. Do not unplug by pulling on cord.
TROUBLESHOOTING CHECKLIST
If your Airblown® is not inflating, the problem may be:
1. The power source is disabled or the cord may be uplugged.
2. The Airblown® may not be fully sealed. Check to ensure the zipper is fully closed.
3. Something may be blocking the fan’s air intake.
NOTE: Once the fan is unplugged and stops blowing, your Airblown® will deflate. For faster deflation, unzip the zipper after unplugging the power supply.
For indoor and outdoor use. For temporary (90 days max) installation and use only. Actual item may vary slightly from photo. This item is not a toy and should be used for decorative purposes only. UL Listed power supply included. Airblown® is a registered trademark of Gemmy Industries Corp.